# Newtonian fluid

A Newtonian fluid (named after Isaac Newton) is a fluid whose stress versus strain rate curve is linear and passes through the origin. The constant of proportionality is known as the viscosity.

## Definition

A simple equation to describe Newtonian fluid behaviour is

$\tau=\mu\frac{du}{dy}$

where

τ is the shear stress exerted by the fluid ("drag") [Pa]
μ is the fluid viscosity - a constant of proportionality [Pa·s]
$\frac{du}{dy}$ is the velocity gradient perpendicular to the direction of shear [s−1]

In common terms, this means the fluid continues to flow, regardless of the forces acting on it. For example, water is Newtonian, because it continues to exemplify fluid properties no matter how fast it is stirred or mixed. Contrast this with a non-Newtonian fluid, in which stirring can either leave a "hole" behind (that gradually fills up over time - this behavior is seen in materials such as pudding, starch in water (oobleck), or, to a less rigorous extent, sand), or climb the stirring rod (the Weissenberg effec]) because of shear thinning, the drop in viscosity causing it to flow more (this is seen in non-drip paints, which brush on easily but become more viscous when on walls).

For a Newtonian fluid, the viscosity, by definition, depends only on temperatur] and pressure (and also the chemical composition of the fluid if the fluid is not a pure substance), not on the forces acting upon it.

If the fluid is incompressible and viscosity is constant across the fluid, the equation governing the shear stress, in the cartesian coordinate system, is

$\tau_{ij}=\mu\left(\frac{\partial u_i}{\partial x_j}+\frac{\partial u_j}{\partial x_i} \right)$

with comoving stress tensor $\mathbb{P}$ (also written as $\mathbf{\sigma}$)

$\mathbb{P}_{ij}= - p \delta_{ij} + \mu\left(\frac{\partial u_i}{\partial x_j}+\frac{\partial u_j}{\partial x_i} \right)$

where, by the convention of tensor notation,

τij is the shear stress on the ith face of a fluid element in the jth direction
p is thermodynamical pressure
ui is the velocity in the ith direction
xj is the jth direction coordinate

If a fluid does not obey this relation, it is termed a non-Newtonian fluid, of which there are several types, including polymer solutions, molten polymers, many solid suspensions and most highly viscous fluids.

## References

This entry is from Wikipedia, the leading user-contributed encyclopedia. It may not have been reviewed by professional editors (see full disclaimer).